tor: sysctl tuning
This commit is contained in:
parent
e075c35813
commit
f2b83151a9
|
@ -24,6 +24,67 @@
|
|||
};
|
||||
};
|
||||
|
||||
# https://support.torproject.org/relay-operators/#relay-operators_relay-bridge-overloaded
|
||||
# https://lists.torproject.org/pipermail/tor-talk/2012-August/025296.html
|
||||
# https://www.ibm.com/docs/en/linux-on-systems?topic=recommendations-network-performance-tuning
|
||||
# https://github.com/Enkidu-6/tor-ddos
|
||||
boot.kernel.sysctl = {
|
||||
# Increase the maximum size of the network interface's receive queue, used
|
||||
# to store received frames after removing them from the network adapter's
|
||||
# ring buffer. High speed adapters should use a high value to prevent the
|
||||
# queue from becoming full and dropping packets causing retransmits.
|
||||
"net.core.netdev_max_backlog" = 262144;
|
||||
# Increase TCP read/write buffers to enable scaling to a larger window
|
||||
# size. Larger windows increase the amount of data to be transferred before
|
||||
# an acknowledgement (ACK) is required. This reduces overall latencies and
|
||||
# results in increased throughput.
|
||||
"net.core.rmem_max" = 33554432;
|
||||
"net.core.wmem_max" = 33554432;
|
||||
"net.ipv4.tcp_rmem" = "4096 131072 33554432";
|
||||
"net.ipv4.tcp_wmem" = "4096 65536 33554432";
|
||||
# Reduce the length of time an orphaned connection will wait before it is
|
||||
# aborted. For workloads or systems that generate or support high levels of
|
||||
# network traffic, it can be advantageous to more aggressively reclaim dead
|
||||
# or stale resources.
|
||||
"net.ipv4.tcp_fin_timeout" = 10;
|
||||
# Maximal number of TCP sockets not attached to any user file handle, held
|
||||
# by system. If this number is exceeded orphaned connections are reset
|
||||
# immediately and warning is printed. This limit exists only to prevent
|
||||
# simple DoS attacks, you _must_ not rely on this or lower the limit
|
||||
# artificially, but rather increase it (probably, after increasing
|
||||
# installed memory), if network conditions require more than default value,
|
||||
# and tune network services to linger and kill such states more
|
||||
# aggressively. Let me to remind again: each orphan eats up to ~64K of
|
||||
# unswappable memory.
|
||||
"net.ipv4.tcp_max_orphans" = 262144;
|
||||
# Maximal number of timewait sockets held by system simultaneously. If this
|
||||
# number is exceeded time-wait socket is immediately destroyed and warning
|
||||
# is printed. This limit exists only to prevent simple DoS attacks, you
|
||||
# _must_ not lower the limit artificially, but rather increase it
|
||||
# (probably, after increasing installed memory), if network conditions
|
||||
# require more than default value.
|
||||
"net.ipv4.tcp_max_tw_buckets" = 2097152;
|
||||
# In high traffic environments, sockets are created and destroyed at very
|
||||
# high rates. This parameter, when set, allows "no longer needed" and
|
||||
# "about to be destroyed" sockets to be used for new connections. When
|
||||
# enabled, this parameter can bypass the allocation and initialization
|
||||
# overhead normally associated with socket creation saving CPU cycles,
|
||||
# system load and time.
|
||||
"net.ipv4.tcp_tw_reuse" = 1;
|
||||
# Aggressivelly check for and close broken connections
|
||||
"net.ipv4.tcp_keepalive_time" = 60;
|
||||
"net.ipv4.tcp_keepalive_probes" = 3;
|
||||
"net.ipv4.tcp_keepalive_intvl" = 10;
|
||||
# Increase the length of the SYN queue and socket listen() backlog to
|
||||
# accommodate more connections waiting to connect.
|
||||
"net.ipv4.tcp_max_syn_backlog" = 262144;
|
||||
"net.core.somaxconn" = 32768;
|
||||
# Expand local port range used for outgoing connections
|
||||
"net.ipv4.ip_local_port_range" = "1025 65530";
|
||||
# Disable RFC1323 timestamps (TODO: why?)
|
||||
"net.ipv4.tcp_timestamps" = 0;
|
||||
};
|
||||
|
||||
environment.systemPackages = with pkgs; [
|
||||
nyx # Command-line monitor for Tor
|
||||
];
|
||||
|
|
Loading…
Reference in a new issue