113 lines
7 KiB
Markdown
113 lines
7 KiB
Markdown
- [x] Bugs
|
|
- [x] Deleting a bolus from the history re-adds it from the pump's
|
|
history. Deleting it again, flags it as invalid at which point
|
|
it will not be added to IOB and not be re-added.
|
|
- [x] Taking over benign warnings on connect doesn't work properly
|
|
(Notification raised but not confirmed?)
|
|
- [x] Optimization reading full history doesn't seem to work
|
|
- [x] Reading full history multiple times duplicates entries shown in Stats/TDD dialog
|
|
- [x] ruffy: Accessing the quick info menu yields noMenu when cartridge is low
|
|
- [x] ruffy: Multi-digit error codes in error history aren't supported
|
|
- [-] No connection can be established anymore; ruffy issue i can't solve
|
|
- Removing the BT device's bonding (!=pairing) fixes it; nope it doesn't
|
|
- Ruffy logs in BTConnection:163 handler.fail("no connection possible: " + e.getMessage());
|
|
- When developing (and thus killing/restarting AAPS often) this is trigger more frequently, leaving
|
|
some ruffy-releated (BT) cache in disarray? Immune to wiping, only repairing seems to work so far
|
|
- [x] Timeout connecting to pump -> crash (result.state wasn't filled in case of timeout)
|
|
- [x] Bolus deleted in treatments (marked invalid?!) is re-added when pump reads history
|
|
Probably fixed through other bugfixes, irrelevant though as "pump history records" can't
|
|
be deleted in AAPS
|
|
- [x] Issue of creating TBR start date from main menu time, which might be off by a minute
|
|
when we read it as a history record. End date time might be slightly off, unless
|
|
CancelTempBasal is updated to read from history (probably not worth it).
|
|
What would happen if while setting the TBR the start time was 12:01 but then
|
|
we read a history record with a start time of 12:02, both running 30min.
|
|
Would the former be trimmed to 1m? That'd be acceptable (this edge case occurs
|
|
if between confirm the TBR and reading the main menu date, the second goes
|
|
from 59.9999 to 0)
|
|
Only in issue if TBR was set on pump. In that case the TBR is cancelled and the
|
|
resulting history record is read
|
|
- [x] Tasks
|
|
- [x] Main
|
|
- [x] On command error: recover by returning to main menu
|
|
check entry and exit points of commands
|
|
- [x] Taking over alerts
|
|
- [x] On connect
|
|
- [x] During bolusing
|
|
- Can the low warning be set as high as 280 or so? To be able to trigger it with a quick refill? yup.
|
|
- [x] Check for errors first thing in runCommand? Whenever analysing a CommandResult?
|
|
- [x] forward all warnings and errors encountered, but only confirm benign ones
|
|
- [-] Reporting back failures in UI, maybe warn if lots of errors (unreachable alert might
|
|
already be enough, since it's based on 'lastSuccessfulConnection', where a connection is
|
|
considered successful if the command during that connection succeeded.
|
|
KeepAlive triggered check suffices.
|
|
- [x] Finish ComboPlugin structure to only have to plug date setting and pump setting in later
|
|
(actually, just use stub methods)
|
|
- [-] Updating time on pump
|
|
- [x] Raise a warning if time clock is off
|
|
- [-] Ruffy: support reading date/time menus
|
|
- [x] Setting pump basal profile
|
|
- [x] Overview notification on updated/failed basal profile
|
|
- [-] Pairing (and sourcing ruffy)
|
|
- [x] Run readReservoirAndBolusLevel after SetTbr too so boluses on the pump are caught sooner?
|
|
Currently the pump gets to know such a record when bolusing or when refresh() is called
|
|
after 15m of no other command taking place. IOB will then be current with next loop
|
|
checkPumpHistory is now called every 15m the least after executing a command
|
|
- [x] Reading history
|
|
- [x] Bolus
|
|
- [x] Read
|
|
- [x] Update DB
|
|
- [x] TBRs
|
|
- [x] Read
|
|
- [x] Update DB
|
|
- [x] Alerts
|
|
- [x] Read
|
|
- [x] Update DB? No, but raise an alert if new ones are found beyond those read at startup
|
|
(Those that occurred while AAPS was not active needn't be turned into alarms,
|
|
the user had to deal with them on the pump already). (Done via "Taking over alerts")
|
|
- [x] Display in UI
|
|
- [x] TDD
|
|
- [x] Read
|
|
- [x] Update DB? No, just write to plugin cache
|
|
- [x] Display in UI
|
|
- [x] Optimize reading full history to pass timestamps of last known records to avoid reading known records
|
|
iteration.
|
|
- [x] Cleanups
|
|
- [x] TBR cancel logic
|
|
- [x] Check dynamic timeout logic in RuffyScripter.runCommand
|
|
- [x] Finish 'enacted' removal rewrite (esp. cancel tbr)
|
|
- [x] ComboPlugin, commands invocation, checks, upadting combo store/cache
|
|
- [x] Finish reconnect
|
|
- [x] Adrian says: when changing time; last treatments timestamp is updated??
|
|
- Nope, at least not with a 2014 pump (SW1.06?)
|
|
- [x] Reconnect and auto-retry for commands
|
|
- [x] Empty battery state
|
|
- [x] Integrate alarms
|
|
- [x] Remove combo alerter thread
|
|
- [x] Display errors in combo tab(?), nope notifications are better suited; also there's the alerts thing already
|
|
- [x] Option to raise overview notifications as android notification with noise (for urgent ones?)
|
|
- [ ] Next version(s)
|
|
- [ ] State in ComboPump is not safely shared among threads
|
|
- [ ] Cancelling TBR or overriding a running one with a new one
|
|
is likely buggy (in both cases requiring a TBR end record)
|
|
checkTbrMismatch causes history read and TBR is right in AAPS
|
|
so far and any TBR set on the pump is cancelled, so it works,
|
|
but isn't clean. Needs some rethink - with a fresh mind -
|
|
maybe understanding what DanaR does, how to translate it to
|
|
the Combo
|
|
- [x] Naming is messed up: pump has warnings and errors, which cause alerts; W+E are thus alerts,
|
|
e.g. pumpAlertHistory should be renamed to alertHistory
|
|
- [ ] Enable BT if disabled? does dana does this?
|
|
- [ ] Finish and test German translation
|
|
- [ ] No clean startup/shutdown; RuffyScripter is instanciated once, idle disconnect thread never killed
|
|
- Application shut down is broken with PersistentNotification (never shut down) and WearPlugin -
|
|
Android logs it as crashed and restarts it, thereby restarting the app (or just keeping it alive,
|
|
also causes errors with the DB as there were attemtps to open a closed DB instance/ref.
|
|
- [ ] Check if TBRs are set to often from ConfigBuilder on high base basal rates (basalstep is 0.01; in reality larger on >1U/h base basal)
|
|
- [ ] With long running commands (e.g. setting basal rate, which can take up to 5m), multiple 'set tbr' commands
|
|
may stack up. Since setting a TBR multiple times in one minute fails, the ComboPlugin rejects such
|
|
request, letting the oldest TBR run till the net iteration. This can potentially be nicely solved
|
|
through the queue branch. However, the original problem is the amount of time the Combo can
|
|
take to execute commands, which might go away (mostly) with command mode.
|
|
- [ ] Fix display of alarms on mainscreen (increase height if needed)
|