diff --git a/app/src/main/res/values-cs/strings.xml b/app/src/main/res/values-cs/strings.xml index 751d559130..d63122c8a0 100644 --- a/app/src/main/res/values-cs/strings.xml +++ b/app/src/main/res/values-cs/strings.xml @@ -276,7 +276,7 @@ Zapnout uzavřenou smyčku, zvyšovat max IOB nad 0 a snižovat cílovou glykémii Jeden týden úspěšného používání s běžným příjmem sacharidů Upravit bazály a koeficinty, když bude potřeba a povolit automatickou detekci citlivosti na inzulín - Povolit další fukce pro běžné používání jako AMA + Povolit další funkce pro běžné používání jako AMA Dosaženo limitu Aplikováno %.2fU Smyčka byla zakázána @@ -670,4 +670,113 @@ Fiasp Ultra rychlý - Oref Čekání na konec bolusu. Zbývá %d sek. + Povolit další funkce pro běžné používání jako SMB + Výchozí hodnota: 3 Toto je klíčová hodnota zabezpečení. Říká, že maximánlní nastavitelný bazál je trojnásobkem maximálního denního bazálu. Patrně to nebudete muset měnit, případně si přečtete o tématu \"3x max denní; 4x aktuální\" + Výchozí hodnota: 4 Toto je druhá klíčová hodnota. Říká, že maximální hodnota dočasného bazálu nikdy nebude větší, než čtyřnásobek aktuálního bazálu. Je to proto, aby se lidé nedostali do hodnot nebezpečných bazálu dříve, než pochpí jak OpenAPS pracuje. Znovy vychozí hodnota je 4 a většina lidí ji nidky nebude muset změnit. Pokud nestačí, obvykle je problém někde jinde. + Výchozí hodnota: 1.2 Toto je bezpečnostní nastavení pro detekci sensitivity. Říká, že autosens může zvýšit bazály, snížit ISF a snížit cílovou hodnotu glykémie o 20% + Výchozí hodnota: 0.7 Toto je bezpečnostní nastavení pro detekci sensitivity. Říká, že autosens může snížit bazály, zvýšit ISF a zvýšit cílovou hodnotu glykémie na 70% + Výchozí hodnota: zapnuto Toto nastavení říká, že autosens může měnit také cílové hodnoty glykémií. + Výchozí hodnota: 2 Toto nastavení říká, po jakou část z hodnoty DIA smyčka po bolusu čeká a nereaguje na změny glykémií (zde 3DIA/2 = 1,5h) + Výchozí hodnota: 3.0 Tato hodnota definuje minimální část strávených sacharidů za každých 5 min. Výchozí hodnota je 3mg/dl/5min. Tato hodnota ovlivňuje výpočet COB + Pozor! Za normálních okolností tyto hodnoty nemusíte měnit. Klikněte ZDE, PŘEČTĚTE si informace a UJISTĚTE se, že jim rozumíte dříve, než je začnete měnit. + Interval pro detekci senzitivity [h] + Počet hodin do minulosti pro detekci senzitivity + Jídlo + g + ]]> + kJ + En + Pr + Tuk + Příkaz je právě prováděn + Ovladač pumpy opraven + Pumpa nedostupná + Chybějící glykémie + Používat systémové notifikace pro výstrahy a oznámení + Místní výstrahy + Výstraha při nedostupných glykémiích + Výstraha při nedostupné pumpě + Limit pro nedostupnost pumpy [min] + Urgetní alarm + INFO + Bluetooth + Hlídač BT + Vypne na 1 sek bluetooth v telefonu, pokud se nedaří připojit k pumpě. Může to pomoci u telefonů, které mají problémy s BT + DexcomG5 aplikace (upravená) + Nahrávat data do NS + Nastavení nahrávání z G5 + Upravená aplikace pro stažení + Zobrazovat detailní změny + Zobrazovat rozdíl s jedním desetinným místem navíc + Nepodporovaný firmware v pumpě + Odesílat data do xDrip+ + V xDrip+ vyberte zdroj dat 640g/Eversense + Glykémie z NS + Hodnota bazálu nahrazena minimální možnou + Kalkulace glykémie + Kalkulace bolusového IOB + Kalkulace bazálního IOB + Kalkulace trendu + Kalkulace superbolusu + Ano + No + Pouze kladné + Pouze záporné + Kalkulace COB + Kalkulace s dočasným cílem + Smyčka povolena + APS vybráno + NSClient má povolení k zápisu + Uzavřená smyčka povolena + Maximální IOB nastaveno správně + Glykémie dostupné z vybraného zdroje + Bazální hodnoty nejsou zarovnané na celé hodiny: %s + Chybný profil: %s + Programování pumpy pro bolus + Obnovit + Stav + Aktivita + Žádné spojení %d min + %d%% (%d min zbývá) + Inicializace + Odpojeno + Vypnuto díky chybě + Vypnuto uživatelem + Beží + Rušení dočasného bazálu + Nastavování doč. bazálu (%d%% / %d min) + Bolus (%.1f U) + Obnovování + Nikdy + Požadovaná operace není pumpou podporována + Nebezpečné použití: extended nebo multiwave bolus je aktivní. Pumpa byla vypnuta jen na 6 hodin. Povolené jsou pouze normální bolusy. + Nebezpečné použití: pumpa má nastavený jiný bazální profil než první. Smyčka byla zakázána. Nastavete první profil a znovu načtěte. + Bolus stejné velikosti už byl během poslední minuty požadován. Jako preventivní ochrana před zdvojeným bolusem byla operace zakázána. + Teď + Načítáni historie pumpy + Výstrahy + Nastavení bazálního profilu + V zásobníku je málo inzulínu + Slabá baterie v pumpě + Pumpa hlásí chybu E%d: %s + Pokouším se obnovit spojení + Provádění bolusu a čtení historie selhalo. Zkontrolujte pumpu a zadejte bolus přes péči + Provádění bolusu selhalo. Zdá se, že žádný bolus nebyl podán. Zkontrolujte pumpu a případně pošlete bolus znovu. Jako bezpečnostní opatření podání bolusu není opakováno. + Pouze %.2f U z bolusu %.2f bylo podáno díky chybě. Zkontrolujte pumpu a proveďte nápravu. + Historie + Varování o ukončeném dočasném bazálu bylo potvrzeno. + Varování + Prázdný + Nízký + Normální + Průměr: %3.1f U + Maximum: %3.1f U + Minimum: %3.1f U + Pro přečtení historie chyb dlouze stiskněte tlačítko ALERTS. Varování: může to způsobit chybu, že pumpa bude odmítat všechny připojení a je pak vyžadováno stisknutí tlačítka na pumpě pro obnovení komunikace. + Je vyžadována aktualizace času na pumpě + Pro přečtení celkových denních dávek dlouze stikněte na pumpě tlačítko TDDS. Varování: může to způsobit chybu, že pumpa bude odmítat všechny připojení a je pak vyžadováno stisknutí tlačítka na pumpě pro obnovení komunikace. + Toto načte kompletní historii pumpy a stavy. Všechno v My Data a hodnoty bazálů. Bolusy a dočasné bazály budou přidány do ošetření, pokud neexistují. Může to způsobit duplicity díky nepřesnosti času v pumpě. Neporučuje se pokud používáte smyčku a je určeno pouze pro speciální připady. Varování: může to způsobit chybu, že pumpa bude odmítat všechny připojení a je pak vyžadováno stisknutí tlačítka na pumpě pro obnovení komunikace. + Opravdu chcete přečíst historii z pumpy a nést důsledky z toho vyplývající? + Nedostatek inzulínu pro takovýto bolus + Chyba spuštění extended bolusu diff --git a/app/src/main/res/values-de/strings.xml b/app/src/main/res/values-de/strings.xml index 33a4b1bed4..265c6c63ac 100644 --- a/app/src/main/res/values-de/strings.xml +++ b/app/src/main/res/values-de/strings.xml @@ -711,9 +711,6 @@ Aktivität %d%% (%d Min. verbleibend) Keine Verbindung zur Pumpe seit %d Min. - Bolusabgabe gestoppt - Bolusabgabe wird abgebrochen - Fehlerprotokol Status Keine Verbindung zur Pumpe Gestoppt (Benutzer) @@ -727,7 +724,6 @@ Bitte starte dein Telefon neu oder starte AndroidAPS in den System-Einstellungen neu. Andernfalls wird AndroidAPS nicht protokolliert (wichtig zum Nachverfolgen und Verifizieren, dass der Algorithmus korrekt funktioniert) TBR %.1f IE (%s, %s) - Nutze System-Benachrichtigungen für Alarme Ein gleich großer Bolus wurde in der letzten Minute angefordert. Dies ist nicht zulässig, um ungewollte Doppelboli zu verhindern und vor eventuellen Bugs zu schützen. Historie wird gelesen Basalratenprofil wird aktualisiert diff --git a/app/src/main/res/values-nl/strings.xml b/app/src/main/res/values-nl/strings.xml index e40e9c2b59..8a822898df 100644 --- a/app/src/main/res/values-nl/strings.xml +++ b/app/src/main/res/values-nl/strings.xml @@ -676,16 +676,12 @@ Bedieningen via horloge Ampull leeg Wachten op koppelen van de pomp - Storingen Wijzigingen van profiel Bluetooth Voeding Waarschuwing bij niet bereikbare pomp Een bolus met dezelfde hoeveelheid was gevraagd binnen de minuut. Om accidentiële of door bugs veroorzaakte dubbele bolussen te vermijden is deze bolus geannuleerd - estopt Bolus toediening wordt Vet - Bolus toediening gestopt - Gebruik systeem notificaties voor waarschuwingen Toon gedetaillieerde delta Niet ondersteune pomp firmware DexcomG5 App (aangepast) diff --git a/app/src/main/res/values/strings.xml b/app/src/main/res/values/strings.xml index ef4478c208..c983b8b3e9 100644 --- a/app/src/main/res/values/strings.xml +++ b/app/src/main/res/values/strings.xml @@ -268,7 +268,6 @@ DIA [h] Duration of Insulin Activity Failed to update basal profile - Errors Reload Uploading E bolus @@ -452,9 +451,9 @@ Model: %02X Protocol: %02X Code: %02X Profile max_daily_safety_multiplier - Default value: 3\nThis is a key OpenAPS safety cap. What this does is limit your basals to be 3x (in this people) your biggest basal rate. You likely will not need to change this, but you should be aware that’s what is discussed about “3x max daily; 4x current” for safety caps. + Default value: 3 This is a key OpenAPS safety cap. What this does is limit your basals to be 3x (in this people) your biggest basal rate. You likely will not need to change this, but you should be aware that’s what is discussed about “3x max daily; 4x current” for safety caps. current_basal_safety_multiplier - Default value: 4\nThis is the other half of the key OpenAPS safety caps, and the other half of “3x max daily; 4x current” of the safety caps. This means your basal, regardless of max basal set on your pump, cannot be any higher than this number times the current level of your basal. This is to prevent people from getting into dangerous territory by setting excessively high max basals before understanding how the algorithm works. Again, the default is 4x; most people will never need to adjust this and are instead more likely to need to adjust other settings if they feel like they are “running into” this safety cap. + Default value: 4 This is the other half of the key OpenAPS safety caps, and the other half of “3x max daily; 4x current” of the safety caps. This means your basal, regardless of max basal set on your pump, cannot be any higher than this number times the current level of your basal. This is to prevent people from getting into dangerous territory by setting excessively high max basals before understanding how the algorithm works. Again, the default is 4x; most people will never need to adjust this and are instead more likely to need to adjust other settings if they feel like they are “running into” this safety cap. autosens_max Default value: 1.2\nThis is a multiplier cap for autosens (and soon autotune) to set a 20% max limit on how high the autosens ratio can be, which in turn determines how high autosens can adjust basals, how low it can adjust ISF, and how low it can set the BG target. autosens_min @@ -464,9 +463,9 @@ bolussnooze_dia_divisor Default value: 2\nBolus snooze is enacted after you do a meal bolus, so the loop won’t counteract with low temps when you’ve just eaten. The example here and default is 2; so a 3 hour DIA means that bolus snooze will be gradually phased out over 1.5 hours (3DIA/2). min_5m_carbimpact - Default value: 3.0\nThis is a setting for default carb absorption impact per 5 minutes. The default is an expected 3mg/dl/5min. This affects how fast COB are decayed, and how much carb absorption is assumed in calculating future predicted BG, when BG is falling more than expected, or not rising as much as expected. + Default value: 3.0 This is a setting for default carb absorption impact per 5 minutes. The default is an expected 3mg/dl/5min. This affects how fast COB are decayed, and how much carb absorption is assumed in calculating future predicted BG, when BG is falling more than expected, or not rising as much as expected. Attention!\nNormally you do not have to change these values below. Please CLICK HERE and READ the text and make sure you UNDERSTAND it before change any of these values. - http://openaps.readthedocs.io/en/latest/docs/walkthrough/phase-3/beyond-low-glucose-suspend.html + http://openaps.readthedocs.io/en/latest/docs/walkthrough/phase-3/beyond-low-glucose-suspend.html Only numeric digits are allowed. Only numeric digits within the range %1$s - %2$s are allowed. The field must not be empty @@ -781,7 +780,7 @@ Switches off the phone\'s bluetooth for one second if no connection to the pump is possible. This may help on some phones where the bluetooth stack freezes. DexcomG5 App (patched) Upload BG data to NS - dexcomg5_nsupload + dexcomg5_nsupload G5 upload settings Customized APK for download Show detailed delta @@ -818,7 +817,7 @@ Activity No connection for %d min %d%% (%d min remaining) - %.1f U (%s, %s) + %.1f U (%s, %s) Initializing Disconnected Suspended due to error @@ -852,7 +851,7 @@ Pump clock update needed History Warning - This will read the full history and state of the pump. Everything in \"My Data\" and the basal rate. Boluses and TBRs will be added to Treatments if they don\'t already exist. This can cause entries to be duplicated because the pump\'s time is imprecise. Using this when normally looping with the pump is highly discouraged and reserved for special circumstances. If you still want to do this, long press this button again.\n\nWARNING: this can trigger a bug which causes the pump to reject all connection attempts and requires pressing a button on the pump to recover and should therefore be avoided. + This will read the full history and state of the pump. Everything in My Data and the basal rate. Boluses and TBRs will be added to Treatments if they don\'t already exist. This can cause entries to be duplicated because the pump\'s time is imprecise. Using this when normally looping with the pump is highly discouraged and reserved for special circumstances. If you still want to do this, long press this button again. WARNING: this can trigger a bug which causes the pump to reject all connection attempts and requires pressing a button on the pump to recover and should therefore be avoided. Are you really sure you want to read all pump data and take the consequences of this action? TBR CANCELLED warning was confirmed Bolus delivery failed. It appears no bolus was delivered. To be sure, please check the pump to avoid a double bolus and then bolus again. To guard against bugs, boluses are not automatically retried.